Kangvape TH-710 Vape Box Battery 650mAh 510 Thread Variable Voltage



-Mod hole diameter:12mm
-Battery Capacity:650mah
-Atomizer Resistance:1.5ohm
-Atomizer Capacity:0.5ml
-Voltage Range:3.0v-3.4v-3.7v-4.0v
-Thead:510 thread
-Advantage:Mico charging, adjustable voltage


-1*TH-710 box mod
-1*K1 ceramic atomizer
-1*magnet ring
-1*USB cable



Operation Instructions:

-Power On/Off: Continue press the fire button 5 times , turn on the box, and the fire button light is on,enter vaping mode;
press the fire button 5 times in 2 seconds continuously, turn off, the fire button is off.

-Preheating: Press the fire button two times, the battery starts to warm up, the voltage is 2.2V, and the preheating time is 15S.

-Power adjustment: In the power on state, continuously press the fire button 3 times to adjust the output voltage 3.0V-3.4V-3.7V-4.0V.
No smoking after 10S, enter the power-saving mode.
The current voltage is 4.0V , the LED light is white.
The current voltage is 3.7V , the LED light is green.
The current voltage is 3.4V , the LED light is blue.
The current voltage is 3.0v , the LED light is red.
The current voltage is lower than 3.0V smoking, LED lights flash 10 times red, indicating that the battery needs to be charged.

-Battery power display:After vaping,release the fire button will show the battery power.Charging,the fire button keep blue light;after full power,the fire button is off.
The current battery power 70%~100% ,the LED light is white;
The current battery power 40%~70% ,the LED light is green;
The current battery power 10%~40% ,the LED light is blue;
The current battery power <10% ,the LED light is red;

-Short-circuit protection: When the output resistance is lower 0.4 ohm, LED flashes 3 times white light, then stop working.

Additional information


Black, Blue, Green, Purple, Red, Silver